Shopping Bag

0 item(s) in cart/ total: $0    view cart
Align T-REX 300X Super Combo RTF RH30E01X

Align T-REX 300X Super Combo RTF RH30E01X

Your Price: $479.99
Retail Price:$529.99
Your Savings:$50.00(9%)
In Stock
Part Number:RH30E01X

Align newly designed T-REX 300X RTF (Ready to Fly), pre-assemble and combo with ALIGN A10 transmitter 10 channels 2.4GHz system and MiniGRS gyro makes flying much easier.

T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.

T-REX 300X equipped with MiniGRS flybarless system special designed for ALIGN small helicopters (Under 500 series). It's light and simple with easy and quick settings, suitable for most pilots and beginners. Also the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.

T-REX 300X RTF is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time.


Standard Equipment

T-REX 300X DOMINATOR Kits Set x 1 set
MiniGRS Flybarless System x 1 set
230 Carbon Fiber Blades x 1 set
50 Tail Blade x 1 set
RCE-BL25A 25 Brushless ESC x 1 set
300MX Brushless Motor(3700KV/2216) x 1
DS450 Digital servo x 3
DS455 Digital servo x 1
A10 Radio Control System Combo x 1 set
MiniA.BUS Receiver x 1
Balance Charger RCC-3SX x 1 set
3S1P 11.1V 1300mAh/30C x 1

T-REX 300X RTF Specification

?Length: 476mm
?Height: 158mm
?Width: 88mm
?Main Blade Length: 230mm
?Main Rotor Diameter: 525mm
?Tail Rotor Diameter: 143mm
?Motor Pinion Gear: 14T
?Main Drive Gear: 115T
?Main Drive Pulley: 40T
?Tail Drive Gear: 13T
?Drive Gear Ratio: 8.21:1:3.08
?Weight(w/o battery): 418g

Equipment Required for Assembly

?Dial Pitch Gauge or Digital Pitch Gauge 
?Swashplate Leveler

A10 Specification

Channel: 10-Channel
Available Models: helicopter/airplane/multicopter
Frequency range: 2.408 ~ 2.475 GHz
Power: no higher than 20dBm(For EU)
System Mode: 2.4G system AFHDS 2A
Suitable Voltage Range: 4.0 ~ 6.0V DC
Receiving Distance: the open ground no interference < 1000M
Low Voltate Warning: Lower than 4.2V
Weight: 485g (excluded battery)
Size: 275x187x102mm

MiniA.BUS Receiver Specification

Channel: 14 channels
RX Sensitivity: -105dBm
RF Range: 2.4055 ~ 2.475 GHz
System Mode: 2.4G system AFHDS 2A
Power: 4.0 ~ 8.4V DC
Transmit Distance: In open space without interference <150M

MiniGRS Flybarless System Specification

Operating voltage range: DC 3.5~8.4V
Operating current consumption: <100mA @ 4.8V
Rotational detection rate: ±300°/sec
Rudder yaw detection rate: ±600°/sec
Sensor resolution: 12 BIT
Swashplate Support: 120° CCPM Swashplate
Mode Support: T-REX250, T-REX300, T-REX450, T-REX470, T-REX500
Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
Operating temperature: -20? ~ 65?
Operating humidity: 0% ~ 95%
Comply with RoHS
Size: 37.6x22.4x13mm

Balance Charger RCC-3SX Specification

Input Voltage: AC 100V~240V(50/60Hz)
Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
Supported Battery Type: Li-polymer / Li-ion
Charging Method: CC/CV
Charging Current: 2A
Size: 123x74.3x32mm
Weight: 260g

Battery Specification

Output: 11.1V 1300mAh 14.4Wh(3S1P)
Supports 5C charging
Dimension: 74x36.5x21mm?Weight: 115g 
14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A

Related Items


Recently Viewed Items